extend timeout to 15 seconds for ARMv8 environment
Show how many seconds it timeouts
By this we can easily extend timeout.
Extend timeout of test_clear_unreachable_keyword_args
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/branches/ruby_2_5@61630 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/envutil.rb (verbose_warning): flush is called on STDOUT
and STDERR sometimes.
From: Nobuyoshi Nakada <nobu@ruby-lang.org>
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61316 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* Avoids the thread-safety issues mentioned in r61192,
when thread concurrently modify default Encodings or $VERBOSE.
Their state will always be the original one once the test finishes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61195 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* It is not thread-safe: if two threads call it concurrently,
the default_internal Encoding might not be restored, which causes
many problems. The same applies for $VERBOSE, which might also not be
restored to its original value but to the new value instead.
This happens because reading the original value might capture the
value already changed by EnvUtil.with_default_internal in another
Thread. One solution could be to capture the value of these globals
before running the test.
* Reverts part of r54522.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61192 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* Check that Encoding.default_internal and Encoding.default_external
are the same before and after every test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61191 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/tracepointchecker.rb: ignore "deletion trace" check
when there are threads other than the main thread.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60916 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c: before this patch, deleted hooks are remvoed at
*the beggining* of hooks (exec_hooks_precheck).
This patch cleanup deleted hooks at
(1) just after hook is deleted (TracePoint#disable and so on)
(2) just after executing hooks (exec_hooks_postcheck)
Most of time (1) is enough, but if some threads running hooks,
we need to wait cleaning up deleted hooks until threads finish
running the hooks. This is why (2) is introduced (and this is
why current impl cleanup deleted hooks at the beggining of hooks).
* test/lib/tracepointchecker.rb: check also the number of delete
waiting hooks.
* cont.c (cont_restore_thread): fix VM->trace_running count.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60782 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/envutil.rb (invoke_ruby): preserve RUBYLIB which is
set by runruby.rb and necessary to load standard libraries.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60753 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit/assertions.rb (assert_raise): should fail if
returned gently in the given block without any exceptions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60614 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Make write methods of IO-like objects accept multiple arguments,
as well as IO#write.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60383 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/envutil.rb (invoke_ruby): add precommand option to
invoke ruby via some other commands, e.g., sudo.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60183 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit/assertions.rb (AllFailures#message): put
indented messages back to the original encoding, to get rid of
Encoding::CompatibilityError when key has non-ASCII characters.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59459 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit/assertions.rb (syntax_check): use eval
instead of RubyVM::InstructionSequence.compile so that other
implementations can share the tests.
[ruby-core:81935] [Bug #13723]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59287 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit.rb (Test::Unit::Parallel#flush_job_tokens):
close jobserver auth fds aflter flush, not to release tokens
more than acquired.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59110 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Try to make this test less fragile by taking into account
the worst case kernel timing resolution.
[ruby-core:81540]
* test/lib/test/unit/assertions.rb (assert_cpu_usage_low):
clamp measurement to minimum measurable time and warn
about tests being too short to measure
* test/ruby/test_io.rb (test_copy_stream_no_busy_wait):
remove pct kwarg and rely on assert_cpu_usage_low defaults
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59003 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When sleeping for the tick rate of 100ms (defined in
thread_pthread.c) as we do in test/ruby/test_io.rb
(test_copy_stream_no_busy_wait), it may not be possible to
measure with <= 10ms resolution on 100HZ systems (CONFIG_HZ in
the Linux kernel). So increase the threshold to 15ms (10ms +
5ms slack for slow systems).
* test/lib/test/unit/assertions.rb (assert_cpu_usage_low):
increase pct default value [ruby-core:81427]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58934 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
I'm likely to make similar mistakes in the future when working
on Fiber auto-scheduling. Start adding assertions for existing
code, first.
* test/ruby/test_io.rb (test_copy_stream_no_busy_wait): added
* test/lib/test/unit/assertions.rb (assert_cpu_usage_low): added
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58924 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/envutil.rb: introduce EnvUtil.apply_timeout_scale to use
this scale from outside.
* test/ruby/test_thread.rb (test_fork_in_thread): respect timeout scale.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58893 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/minitest/unit.rb (MiniTest::Unit#_run_anything): stop
if any errors or failures.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58661 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread.c (Init_Thread): [EXPERIMENTAL] refine the "stream
closed" special exception message, by explicating that it is
caused by threading. [ruby-core:80583] [Bug #13405]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58286 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit/assertions.rb (assert_not_respond_to): allow
private flag as well as assert_respond_to.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58266 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit/assertions.rb (assert_respond_to): do not
call super class assert_respond_to when false priv is given.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58264 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/envutil.rb: rbconfig/sizeof may not be available when
cross-compiling. use RbConfig::Limits instead of calculating
limits of Fixnum with hard-coded CHAR_BIT.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57757 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/envutil.rb (EnvUtil.diagnostic_reports): ruby-runner
execs "RUBY_INSTALL_NAME" file, so search by that name.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57656 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit/parallel.rb (_report): send a response and a
newline atomically, to get rid of intervention with "p" which
runs in a separate thread.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57589 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit.rb (Test::Unit::Parallel#non_options):
support old GNU make, which uses --jobserver-fds option instead
of --jobserver-auth.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57563 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit.rb (Statistics#record): record most asserted
tests.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57559 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit.rb (Test::Unit::Statistics#record): check if
@longest is set first.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57556 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit.rb (Test::Unit::Parallel#deal): deal with
record.
* test/lib/test/unit/parallel.rb (Test::Unit::Worker#record):
report test records to the master.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57555 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* test/lib/test/unit.rb (Test::Unit::Statistics): show statistics.
only --longest option is implemented right now.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57554 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
